Wall mount enclosure assembly
Cover Type: Lift-Off 4-Screw Solid/Opaque Cover
Catalog #: AMU1084
Height: 10.05 in.
Width: 8.27 in.
Depth: 4 in.
Usable Depth: 4.12 in.
Volume: 416 cu. in.
Carton Quantity: 1
Carton Weight: 4 lb.
U.S. Patent No. 7,572,975
Country of Origin: United States of America
Non-corrosive, non-conductive, light weight with lower installation cost, easy to modify and longer life cycle compared to steel. Rigid design with back panel inserts plus nonmetallic mounting brackets and a gasket system encased in a continuous channel on the cover.
Enclose and protect electrial and electronic controls, instruments or components for indoor and outdoor applications. Especially well suited for extreme temperature and corrosive environments.
UL 508A, UL 50 and UL 50E Types 1, 2, 3, 3R, 4, 4X, 6P, 12 and 13; File No. E120175
CSA-C22.2 No. 14 and CSA C22.2 No. 94 Types 1, 2, 3, 3R, 4, 4X, 6P, 12 and 13; File No. 89590
- EN / IEC 60204-1 and 60529 Type IP66 and units rated 6P are IP68 (submersible up to 24 hours at a depth of 6 feet/1.8 meters)
- RoHS directive
RAL 7035 - Gray
ULTRAGUARD® Fiberglass reinforced polyester - compression molded SMC box and Cover
Nonmetal feet fastened to back side brass insert
Back Panels, Hinged Front Panel, Hole Plugs, Vent Kits, and Pole Mount Kit
316 stainless steel external hardware (hinges, latches and fasteners)
Polycarbonate mounting brackets
Plated carbon steel internal hardware
Polyurethane (FIP) Formed-In-Place gasket system