Wall mount enclosure assembly with 9 pushbutton holes in cover
Cover Type: Hinged 2-Screw Solid/Opaque Cover (30.5 mm PB Hole Size)
Brand: Pushbutton Series
Catalog #: AM1084HP9
Height: 10.14 in.
Width: 8.26 in.
Depth: 4 in.
Usable Depth: 3.68 in.
Volume: 346 cu. in.
Carton Quantity: 1
Carton Weight: 5 lb.
Country of Origin: United States of America
Non-corrosive, non-conductive, light weight with lower installation cost, easy to modify and longer life cycle compared to steel. Rigid design with back panel inserts plus stainless steel mounting brackets and a gasket system encased in a continuous channel on the cover.
Designed to protect push-button switches from damage and wear, these enclosures have holes for mounting push buttons and an internal compartment to house associated wires and mechanisms. Push buttons are often used for operating industrial machines or processes for indoor and outdoor applications. Note: 22.5mm hole designs are available by adding a "22" to the part number (i.e. AM1084HP922).
UL 508A, UL 50 and UL 50E Types 1, 2, 3, 3R, 4, 4X, 12 and 13; File No. E120175
CSA-C22.2 No. 14 and CSA C22.2 No. 94 Types 1, 2, 3, 3R, 4, 4X, 12 and 13; File No. 89590
- EN / IEC 60204-1 and 60529 Type IP66
- RoHS directive
RAL 7035 - Gray
ULTRAGUARD® Fiberglass reinforced polyester - compression molded SMC box and Cover
Stainless steel feet fastened to back side brass inserts
316 stainless steel external hardware (hinges, latches and fasteners)
316 stainless steel mounting brackets
Plated carbon steel internal hardware
Polyurethane (FIP) Formed-In-Place gasket system